Poly Epoxy Gloss Finish - EP902

Poly Epoxy Gloss Finish is a unique high performance two component polyurethane finish coat with excellent resistance to abrasion, moisture, petroleum solvents, mineral and vegetable oils, alkalis and acids.

Product Rating:


Product Code: EP 902
Application: Roller & Brush
Appearance: High Gloss
Spread Rate: 10-12m2/l per coat
Packaging: 1L&5L
Colours: White, Clear & Standard Colours

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers


  • The most unusual feature of Impa Poly Epoxy Gloss Finish is that, unlike most other classes of high performance coatings, it looks as good as it protects.  
  • The sophisticated combination of Impa Poly Epoxy Gloss Finish reactive acrylic resins gives a system unsurpassed for gloss and colour retention.


  • Suitable for contact with potable water.
  • A high gloss finish with excellent non-yellowing characteristics, gloss retention, toughness and durability.
  • It has very good chemical resistance properties and is normally used in a system over IMPA POLY EPOXY UNDERCOAT
  • Excellent adhesion on correctly prepared surfaces.
  • Good resistance to mechanical damage and abrasion.
  • If fully cured it offers outstanding resistance to a wide range of industrial chemicals.
  • Seamless and hygienic
  • Available in range of colours
  • Excellent protective qualities
  • Can be used on a variety of substrates
  • Gloss finish, easy to clean
  • UV resistant;  Can be used as exterior coating
  • Outperforms conventional decorative coatings.
  • Chemical resistant:  Withstands diluted acids, alkalis and solvents

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.