Rust Convertor - RES1024

Rust Convertor is a high quality co-polymer based waterborne rust converter for use on rusted mild steel that reacts and converts rust into a stable surface

Product Rating:


Product Code: RES 1024
Application: Brush
Appearance: Matt
Spread Rate: 3 m2/l
Packaging: 500ml & 1L plastic bottles
Colours: Creamy White - converts to blue-black

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers


  • Rust Convertor is a high quality co-polymer based waterborne rust converter for use on rusted mild steel that reacts and convert rust to a stable surface


  • Reacts chemically with rust and effectively stops further corrosion.
  • No need to use sand blasting or acid beased cleaners
  • Can be used on wet surfaces
  • On drying, the creamy white coating is converted to a firmly adherent bluish-black film.
  • Water insoluble after curing
  • Can be overcoated with most types of solvent borne and waterborne emulsion paints such as alkyds, acrylics, epoxies, polyurethanes and vinyl systems

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.