Primer

Alkyline Resistant Plaster Primer - PI2002

AR Plaster Primer is a solvent based primer for masonry and gypsum surfaces.

 
 
Product Rating:

Data

Product Code: PI 2002
Application: Roller & Brush
Appearance: Matt
Spread Rate: 6-8m2/l per coat @55µm, DFT
Packaging: 1L, 5L & 20L
Colours: White

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers

Description

  • Impa AR Plaster Primer is a solvent based primer for masonry and gypsum surfaces.

Features

  • As a primer coat on alkaline substrates such as interior and exterior cement plaster and concrete
  • As a binding and sealing coat on soft and brittle cement plaster, porous paper-face board, brickwork, soft board and gypsum plaster
  • Provides good adhesion
  • Can be used with solvent-based and water-based top coats.
  • Excellent recoating - can be recoated within 4 hours and any time during its life.
  • Outstanding adhesion - will stick to old alkyd, fresh concrete and difficult to paint chalky surfaces.

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.