Impa MP10 Metal Primer

Impa MP10 Metal Primer is a supreme quality Waterborne Primer for various metals. 

Product Rating:


Product Code: PI1021
Application: Brush & Roller
Appearance: Low Sheen
Spread Rate: 10m2/l
Packaging: 1L, 5L & 20L
Colours: Light Grey

Tools & Resources

Download Data Sheet  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers


  • It has a built-in anti-rust function for new or weathered galvanized iron and metal.
  • It can be used on various products domestically, and industrially.  Where ever rust can accumulate windows- and door frames, implements, tanks, rail and roofs or priming of industrial steel framing.


  • Excellent corrosion resistance
  • Environmentally Waterborne product
  • Good Sanding
  • Dries out rapidly and can be handled within 1 hour
  • The surface of the finished product will be smooth and ready to be painted on, because it has good floe and leveling properties.
  • Can be safely used in a confined space.
  • The product is water-based and therefore solvent free
  • Good adhesion between topcoat and intercoat.
  • Apeo, formadeyde and ammonia free

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.