QD Enamel Low Solids Primer - PI2036

QD LS Primer is a one component, solvent base, modified styrenated alkyd resin, air drying pigmented primer.

Product Rating:


Product Code: PI 2036
Application: Brush or Spraying
Appearance: Semi Gloss
Spread Rate: 8 m2/l @ 25µm, DFT
Packaging: 20L & 200L
Colours: Red Oxide & Light Grey

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers


  • A fast drying primer for use under Impa QD Enamel Range and other industrial topcoats.
  • Suitable for inland and coastal environments.


  • Semi-gloss finish
  • Dries to a good quality, tough and durable finish.
  • It has a very even flow and excellent leveling
  • Easy application and rapid drying to a gloss finish.
  • Not resistant to strong acids and alkalis outside ph range of 6-9.

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.