Sealer

Timbercare Floorshield - VA1411

Timbercare Floorshield is a technically advanced pure acrylic water-based hard wearing floor sealer.

 
 
Product Rating:

Data

Product Code: VA 1411
Application: Roller, Brush & Spray Application
Appearance: Semi Gloss & Matt
Spread Rate: 10-14 m2/l per coat
Packaging: 1L& 5L
Colours: Clear/Transparent

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers

Description

  • Formulated for enhanced toughness affording maximum protection and enhancement of the appearance of wooden floor, tables and counter tops. Available in two sheens namely gloss and matt
  • Dries rapidly to give long-lasting protection against scratching, staining and hot objects. Highly resistant to marking by water and alcohol spills. The clear finish enhances the natural beauty of all wood surfaces.

Features

  • Very good wet and dry film appearance
  • No wood discoloration
  • Very good block resistance
  • Excellent resistance to household chemicals
  • Excellent wear resistance
  • Good sand ability
  • Excellent adhesion and abrasion resistance.
  • Water based- easy cleaning and quick drying
  • Highly recommended for use on all wooden surfaces which require a tough scratch-resistant clear coating.
  • Able to withstand limited exposure to direct sunshine and/or weather, but ideally for use indoors only.
  • Can also be used for sealing timber used in the manufacture of saunas and steam baths
  • Remains of old coatings should first be removed with stripper or by sanding and scraping.

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.