Topcoat

Endurashield Acrylic - SU1015

Endurashield is a 100% pure fiber enriched acrylic paint for exterior use on walls with a built in primer. The product has a low to no dust attraction and self-cleaning properties.

 
 
Product Rating:

Data

Product Code: SU 1015
Application: Roller & Brush
Appearance: Low Sheen
Spread Rate: 8-10 m2/l per coat @ 55µm DFT
Packaging: 5L & 25L
Colours: White, Base: Pastel-Clear
Guarantee: 15 years

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers

Description

  • The unique raw material composition in the product gives a tough flexible and waterproof finish, for long life protection in harsh weather conditions.
  • This product is fiber enriched and is ideal as an alternative to the traditional texture paints with excellent features for hairline crack bridging. IMPA guarantee that this product will not flake or lose its properties for a period of 15 years, if correctly applied.
  • Where an undercoat is recommended it is for specific purpose or economical reasons. IMPA ENDURASHIELD is a highly durable waterproofing and weather-proofing coating which is totally tack-free in the dry cured film state.

Features

  • Impa Endurashield  contains a special bonding element that enhances its adhesive properties and spreading rate.
  • It has an exceptionally low sheen finish, which yields low dust-retention and endures that the surface can be kept clean easily through rinsing with clean water.  It resists the most severe weather conditions like rain and UV sunlight.
  • Impa Endurashield  will not lose its flexibility on ageing due to the FIBER based formulation.
  • A colour tinted in Impa Endurashield  is light-fast.
  • The increased numbers of fiber, mica provide IMPA ENDURASHIELD with double the body normally associated with this type of coatings.  For the best results, two coats are recommended.
  • Superior dirt resistance & durability.  Contains fungicide to inhibit growth of mould & fungus, protecting it for longer.

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.