Topcoat

Renotex Acrylic - RE1467

Renotex Acrylic is an extremely durable water based fine textured coating for weather proofing and decorating exterior walls.

 
 
Product Rating:

Data

Product Code: RE1467
Application: Roller & Brush
Appearance: Low Sheen
Spread Rate: 5-6 m2/l per coat
Packaging: 5L & 25L
Colours: As per colour card
Guarantee: 5 Years

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers

Description

  • Renotex Acrylic is a thick coating so easily fill and bridge hairline cracks.  Ideal as a finish for exterior,  new work on previously painted concrete, plaster and cement.
  • Yields an exceptional exterior durability with a weather-resistant finish which makes it ideal for use in large building and housing projects. Can be used on properly primed wood and metal surfaces.

Features

  • Renotex Acrylic contains a special bonding element that enhances its spreading rate.
  • It has an exceptionally low to matt sheen finish, which yields low dust-retention and ensures that the surface can be kept clean easily through rinsing with clean water.
  • It resists the most severe weather conditions like rain and UV sunlight.
  • Renotex Acrylic will not lose its flexibility on ageing due to Silica based formulation.
  • Factory colours supplied in Renotex Acrylic is colour fast.
  • The increased numbers of marble and mica particles provide Renotex Acrylic with double the body normally associated with textured coatings.
  • Renotex Acrylic covers hairline cracks in one to two coats and leaves at least 50% more dried film than conventional paint.
  • For best results two coats are recommended.

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.