Varnish

Timbacare Supreme Sealer - VA2007

Timbacare Supreme Sealer is a flexible sealer for external wood surfaces, it is highly recommended for exterior wooden doors, windows and garden furniture and surfaces where toughness is required.

 
 
Product Rating:

Data

Product Code: VA 2007
Application: Roller & Brush
Appearance: Semi - gloss
Spread Rate: 12-14 m2/l per coat
Packaging: 500 ml,1L & 5L
Colours: Clear,Dark Oak,Teak,Amber,Imbuia & Mohogany

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Colour Chart  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers

Description

  • The biggest consideration in our South African climate is the damage done to surface coatings and consequently to the wood by the sun.  UV-radiation (Ultra Violet Radiation) is the culprit and a sealer must have high UV absorption factors.  .Because it is a flexible sealer, it is highly recommended for exterior garden furniture and surfaces where toughness is required.
     
  • Timbacare Supreme Sealer looks like a varnish but does not behave like a varnish.  Since it has been developed for exterior wood surfaces, special attention is devoted to the product to ensure that natural wood appearance is retained.  It will not flake and therefore future maintenance is easily maintained.

Features

  • Timbacare Supreme Sealer   is applied with ease and exceptional penetration into the surface.Provide a non-oily grain-enhancing gloss finish.
  • It is specially developed to deal with SA conditions where wood is exposed to severe weather conditions.
  • It retains its gloss and pliability over a long period of time and will expansion very well.
  • The product is quick - drying
  • It is coloured - fast pigments and will therefore not fade as a result of exposure to the sun.
  • Strengthened with ultra violet light deflectors and preserves
  •  Almost double the life of normal varnishes.
  • Builds good film.

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.