Timbadeck SB Sealer - FS2142

Timbadeck SB Sealer is a high performance, translucent satin finish for exterior decks.

Product Rating:


Product Code: FS 2142
Application: Roller & Brush
Appearance: Suede
Spread Rate: 12m2/l per coat
Packaging: 1L, 5L & 20L
Colours: Clear,Amber ,Teak & Mid Brown

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Colour Chart  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers


  • This hybrid high solids formulation offers optimum protection, ultimate durability and a beautiful furniture-like appearance with the simplicity of a one-product, two-coat application.
  •   The signature Timbadeck SB Sealer look is another example of the advancements central to the Impa Next Wve Technology
  • Timbadeck SB Sealer obtains a deep penetration into the timber which is the key into the timber and the foundation for the film building process, which provides UV and weather protection.


  • High Performance for Exterior Wood
  • For Decks, Lattice, Railings and Benches
  • Superior quality SB Timbadeck Sealer looks like a varnish but does not behave like a varnish
  • It has an exceptionally high degree of UV resistance and special agents to prevent against dry rot, surface insect and fungal attack
  • SB Timbadeck Sealer is micro-porous allowing the timber to breathe and moisture to evaporate.
  • Excellent wind, water, pollution and salt spray protection.
  • Low-build characteristic for a smooth and attractive matt surface.
  • Penetrates deeply to nourish wood.
  • Non-toxic when dry
  • Does not affect glue
  • Bio-degrades at the end of its life cycle

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.