Aquaflex Acrylic Waterproofing - WA1017

Aquaflex is a durable Pure Acrylic Waterproofing Coating and is a high build coating with very low dirt pickup

Product Rating:


Product Code: WA 1017
Application: Roller & Brush
Appearance: Low Sheen
Spread Rate: m2/l
Packaging: 1L, 5L & 20L
Colours: Black, Red, Brown, White and Grey
Guarantee: 5 years if applied by specialist

Tools & Resources

Download Data Sheet  |  Download MSDS  |  Colour Chart  |  Paint calculator  |  Get Adobe Reader
Please note, downloads may be blocked by popup blockers


  • Impa Aquaflex is characterised by having outstanding waterproofing, long term durability, UV resistance, excellent adhesion, local flexibility, exceptional water resistance and low dirt retention.
  • Impa Aquaflex has been tested to and complies with the requirements of the Artificial Rain Penetration Test (SABS 0400:1990)
  • Impa Aquaflex is a 5-layer system fabric reinforced waterproofing system designed to overcome unevenness of roof surface by the building up of waterproofing membrane thickness.
  • Impa Aquaflex systems is suitable for positive waterproofing of concrete flat roofs in areas with light foot traffic is entertained


  • Excellent waterproofing properties and a very low water absorption after prolonged immersion in water.
  • Excellent weather and ultra-violet resistance.
  • Will withstand movement of the substrate by exhibiting elongation and extensibility and will not harden or crack.
  • Resistance to Alkaline and Acidic atmospheres.
  • Excellent adhesion to all suitably prepared substrates.
  •  Very little or no maintenance required, depending on the amount of traffic.
  •  Lower installation cost since waterborne roof compounds are easily applied by brush, roller or squeegee.
  •  Excellent resistance to salt spray, mould and fungus

Disclaimer: The technical information contained in this document are given in good faith and are meant to be used as a guideline by the specifier or user. Whilst we are confident about the quality of our products, we cannot accept any liability for the incorrect use or application of our products. Surface preparation forms an integral part of the scope of works and it is expected that the highest standards are maintained during surface preparation and application, to ensure that our products perform as intended. Always ensure to use the same product batch numbers, refrain from doing spot touch-ups and paint surfaces from corner to corner to prevent colour and sheen variance. As technology may change over time we reserve the right to change products to keep up with changes in raw materials or product trends without pre notice. Although we will always privail to keep clients informed about changes to be made, but cannot bind ourself to such notes Please ensure the use of the latest Technical Data Sheet.